Contents
Introduction of Visual Field Tests
Your visual field is how broad of an area your eye can view when you concentrate on a centre point. The visual field tests are one way your ophthalmologist estimates how much vision you have in either eye and how much vision loss may have happened over time.
A visual field test can discover if you have blind spots called scotoma in your vision and where they are. A scotoma’s size and shape can tell how eye disease or a brain disorder is harming your vision. For example, if you have glaucoma, this test helps to determine any feasible side (peripheral) vision loss from this disease.
Ophthalmologists also use visual field tests to evaluate how vision may be defined by eyelid problems like ptosis and droopy eyelids.
Your ophthalmologist may use data from the visual field tests to find diseases like:
- Glaucoma
- Macular degeneration
- Optic glioma
- Brain tumour
- Multiple sclerosis
- Stroke
- Temporal arteritis
- Central nervous system disorders
- Pituitary gland disorders
- High blood pressure
One can go for glaucoma surgery after having the test.
Uses of visual field test
Visual field testing is most commonly used to identify signs of glaucoma harm to the optic nerve. Moreover, visual field tests are useful for disclosure of primary or peripheral retinal diseases of the retina, eyelid conditions like drooping, optic nerve damage and disease, and occipital cortex.
The uses of visual field testing are :
- The major use of visual eye testing is screening for glaucoma. Peripheral vision loss is usually an initial and detailed sign of glaucoma. Visual field tests help make the analysis of glaucoma and repeat testing is applied to observe treatment.
- Screening and measuring for lid droop i.e ptosis.
- Testing for toxicity from some medicines like, screening for toxicity from hydroxychloroquine which can harm the central retina.
- Estimating the size of retinal diseases like retinitis pigmentosa, retinal detachment etc.
- Identifying conditions that change the visual pathways from the optic nerves to the occipital lobe of the brain, involving tumours, inflammatory disease, increased intracranial pressure, eye injury etc.
- Examination for malingering behaviour or mental disorders.
Visual field testing procedure performed?
There are a variety of techniques to estimate the visual fields. Visual field testing is done one eye at a time, with the different eye fully covered to avoid errors. In all testing, the patient must look straight ahead at every time to correctly map the peripheral visual field. Most common visual field testing methods also continuously observe fixation or the capacity of the patient to keep a constant straight-ahead gaze.
Types of Visual Field Tests
A variety of sensitive tests for estimating visual field loss exist, including:
-
Automated Perimetry
Different forms of automated perimetry tests contain your answers to the presence of objects in different areas of your field of seeing. While your head is retained still, normally with a forehead and chin stay inside a big bowl-like instrument. You look at a source of light straight ahead and tiny lights of different forces are flashed from random spots in your visual field.
Every time you see one of these lights, you quickly press a button or use some other means to show your response. If you can’t see the lights in some parts of your field of view, then you may have a blind spot showing vision loss.
-
Electroretinography
This test includes electrical activity produced by the photoreceptor cells in the retina. When the eye is stimulated by a specific strobe light or a reversing checkerboard design of light. The measurement is seized by an electrode located on the cornea, and a graphic record named an electroretinogram is formed. Electroretinography helps diagnose many hereditary and acquired disorders of the retina.
-
Confrontation visual field testing
The doctor directs the patient to see straight ahead. The doctor will give stationary or moving targets in the patient’s peripheral visual fields. While keeping a straight-ahead gaze, the patient let the doctor understand when he/she can view the target in the peripheral vision. The target may be a little disc on a stick, but usually, the target is the doctor’s hand holding up 1 or 2 fingers.
-
Amsler grid
This is a marked image of a grid with a dot in the centre. The patient is directed to look at the dot, one eye at a time, and see whether the grid lines circling the dot look distorted, faded, or partly missing. This test is most often used to identify central visual field defects.
-
Static automated perimetry
Pinpoint flashes of light of differing size and brightness are projected within a huge white bowl. The patient is claimed to look at the middle of the bowl and press a button each time light is observed in the peripheral vision. The machine receives the data and uses sophisticated software to examine the results.
-
Kinetic perimetry
Moving targets of different light sizes and intensities are determined and the patient shows when they display visible in the peripheral vision. The resulting data is applied to map the full visual field. The full, normal range of the visual field increases about 120° vertically and an almost 160° horizontally.
-
Frequency doubling perimetry
This test uses different intensities of a flickering image to examine the visual field. It is especially helpful in identifying early glaucoma field loss. Frequency doubling is based on an optical image produced with upright bars of varying colours normally black and white resembling on a screen.
How long does a visual field test procedure take?
Visual field testing needs the least amount of time for most healthy patients. But it may be tiring or stressful for those who are sick or old. Visual field testing is more stressful for younger children, patients with mental disabilities.
If the initial visual field test is seen as abnormal or inconclusive because it was incorrect, it may require to be repeated. It is not unusual for patients to neglect to hold their gaze fixed right ahead. With repeat visual field testing, many patients see their capacity to manage a constant straight-ahead gaze develops, thus developing the safety of the results.
The following are general testing times for visual fields in both eyes:
- Amsler grid and Confrontation visual field take a few minutes to be treated.
- A static field for lid droop or ptosis screening takes about 8 minutes.
- The static field for comprehensive glaucoma evaluation takes about 15 minutes.
- The Frequency doubling perimetry testing for glaucoma screening takes approximately 10 minutes.
- Kinetic Goldmann Perimetry for entire glaucoma assessment is about 20 minutes procedure.
Overview of Visual Field Test in glaucoma
Glaucoma is an eye disease that originally affects your side vision ( peripheral ). One of the key tests that your ophthalmologists will perform as part of the diagnosis for glaucoma is the visual field test, which is repeated annually to decide if the disease is permanent or becoming worse. There are many diverse types of visual field machines.
As the disease advances, more and more of the peripheral vision is lost until ultimately, in very late and high-level disease, the central vision is also impaired. Sometimes there are patients with glaucoma who have their central vision-impaired early in the way of the disease, which is a different reason that formal visual field testing is so valuable.
Repeated visual field tests are a crucial part of building baseline visual fields and observing glaucoma over time. The test does have some variability, so repeating the test not only helps your eye doctor determine if a change is real but also will develop your test-taking ability over time.
It is helpful to understand that the test is designed to be challenging, so try not to be too stressed while going for a visual test to resolve the problem of glaucoma. The test usually takes 5-10 minutes for each eye
What happens during the Visual Field Test?
A doctor will seat you conveniently in front of the machine and will use appropriate lenses to correct for any glasses correction you require. He or she will give you guidance on how to take the test. During the test, the specialist will examine to make sure that you are viewing straight ahead at the fixation light. Examine to make sure that your upper eyelid is large enough to as not to block your vision, and may kindly reposition you if your head has shifted too much.
How long does the test last?
The test, which includes the central and side vision for each eye, takes about 5-10 minutes, and you can blink commonly throughout. During the test, one eye is coated (so that one eye is tested at a time. And you want to constantly stare straight ahead at the calm yellow light. Then, other lights flash one at a time off to the side and you must press the button whenever you view one of these lights.
The test is created so that the light flashes slowly dim until you can no longer see them. So do not worry if it appears to be a long pause within flashes. You are not demanded to see all the lights, and indeed you may notice some of them. This also means that many of the lights you do view will be very low. Also, you can constantly pause the test by pressing the response button down if you need a rest. When you release the button the test resumes.
Continuous Monitoring
After you have taken the test already, you will understand what to expect. And then the task of monitoring your glaucoma and making sure that it continues steady will start during your follow-up visits.
There are quite typical variations that doctors see in glaucoma, including the shape and place of any defects. Also, when there is more central vision loss or if you have a weaker vision in one eye, many algorithms can be done.
Sometimes, other tests will be used to observe changes in your vision, in addition to the visual field test, because they can give various types of helpful information.
It is very important to check the retina and optic disc correctly to evaluate whether or not a visual field defect meets the front of the disc and retina, or fits with other clinical signs.
Cost of the visual testing
Conclusion
It’s suggested get the testing done with the best eye hospital in Delhi. The visual field test is estimated as a functional test. Enables your doctor to tell you if you have lost any field of vision from glaucoma. Also, help to define the rate of disease progression. Your doctor will be capable to tell you how critical your disease is based on this test. Although the test is not painful, and it just takes a few minutes for each eye. Many eye and brain diseases can cause peripheral vision loss and other visual field irregularities. Visual field tests are done by eye care professionals to recognise blind spots and other visual field defects, which can be an early indication of these problems.
For regular eye checkup and Visual Field tests, do visit our website Eyemantra.
To get your regular eye checked thoroughly from an expert ophthalmologist, you can book appointments at +91-8851044355. Or mail at eyemantra1@gmail.com.
We also offer various services like Retina Surgery, Specs Removal, Cataract Surgery, and much more.
You may also like: