We consider that you must have specifically searching to know about Phaco Surgery when your search results must have shown this blog link. Therefore, we are moving straight to the world of Phaco-emulsification, instead of going about explaining Cataract Surgery, etc.
What is Phaco Surgery?
In earlier days, the cataract surgery used to be carried out with an incision of about 8.0 to 10.0 mm in length. Then, through it, the cataract was removed. Next, an intraocular lens was implanted. Whereas, nowadays, Phaco or Phaco-emulsification Surgery, has got quite the preferred method to get the cataract removed.
In Phaco Surgery, cataract is broken into small pieces and removed from the eye. A tiny incision is placed in the eye, and a hollow Phaco needle is entered through the opening. The size of the incision is between 2.5 to 2.8 mm only. It is done by using ultrasound with the help of a special phaco equipment.
By sending energy via the tip of the Phaco needle, the cataract lens gets dissolved and is sucked out with the help of this needle itself. During Phaco Surgery, the cataract is removed but most of the thin outer membrane of the lens, called the lens capsule, is left in place. The incision is made on a side of the cornea (the clear outer covering of the eye). The needle emits ultrasound waves that soften and break up the lens into little pieces so it can be suctioned out.
Next, an artificial lens called a Foldable Intra-Ocular Lens is injected inside through this small opening. Once inserted the eye, it opens up and serves to replace the original lens. Since the opening incision has been made very small, it self-seals, and no sutures are required to close the wound. It would be a very rare case when a single stitch may be needed.
That is how this procedure has come to be known as “Stitchless” cataract surgery.
Types of Lenses used
Once the eye doctor has removed the natural lens, it is, generally, replaced with a clear plastic lens called an Intra-Ocular Lens (IOL). The IOL is placed in the lens capsule that gets left in the eye. The artificial lens can focus light on the retina of the eye and improve sight.
IOLs come in 3 basic forms: Monofocal, Astigmatic (or Toric), and Multifocal lenses.
- Monofocal lenses: The most commonly implanted lenses are Monofocal Lenses. They have the same power throughout all areas of the lens. They may have a fixed focus or allow for changes in focus.
- Fixed Focus Monofocal IOLs can provide exceptional distance vision. But, as these lenses have a fixed focus set for distant vision, you may require reading glasses for good near vision.
- Accommodating Monofocal IOLs are a relatively new lens option. They can be used for patients who want both good distant, as well as near vision. Without having to use eyeglasses or contact lenses. The focusing power of these lenses is still the same throughout. However, they can shift from focusing on distant objects to focusing on nearby ones by physically moving inside the eye in response to the focusing movement of the eye muscles.
- Astigmatic (Toric) Lenses: Astigmatism has irregularity in the curvature of the front surface of the eye, the cornea, or of the lens inside the eye. Due to which, part of an image gets blurredAstigmatic IOLs to hold astigmatism correction in them. They can be used for patients who have a lot of astigmatisms and wish to reduce it.
- Multifocal IOLs: These are are just like bifocal eyeglasses. Though, in such IOLs, several areas have different powers. This allows individuals to see objects clearly at distant, intermediate and nearby distances. However, such multifocal lenses are not advisable for everyone. For some individuals, they may create more difficulties with night vision and glare than monofocal IOL lenses.
The type of IOL implant that will work best for you will depend on your current vision status, the problems, your vision and lifestyle needs.
An ophthalmologist and cataract surgeon would be able to advise the most suitable lens implant to you.
Regular Phaco Surgery for Cataract
It is a technique of Phaco-emulsification Surgery wherein the cataract is emulsified using ultrasound. The incision size is approximately 3.0 mm long.
IOL Options under Regular Phaco
Lenses used in Regular Phaco are slightly firm. Therefore the incision size required is somewhat longer at 3.0 mm so that the lens can be inserted. Following is the list of the IOLs that are used for Regular Phaco:
Micro Phaco Cataract Surgery
The technique where the cataractous lens is dissolved and aspirated through a 2.2 mm, or even less, micro-incision. A special super soft IOL is inserted through the same, without requiring it to be enlarged at this stage. So you can say, the incision in the Microphaco technique is much smaller than the incision in a Regular Phaco technique.
The smaller incision enables high-quality and minimal invasion during surgery, better results and less disruption of tissue. The entire procedure has improved the stability of the wound, thereby faster recovery.
Features, that are also advantages of opting for Micro-Phaco are:
- No stitches
- Walk-in- Walk-out Surgery
- Quicker recovery
- Reduced need for glasses
IOL Options under Regular Phaco
Lenses used in Micro Phaco surgery are soft lenses which can easily go through a micro-incision of 2.2 mm.
Cylinder correction in Phaco Cataract Surgery
Cylindrical also means a three-dimensional optical defect. A lot of times cylinder may have an optical defect, generally termed as Regular Astigmatism in professionals language. It is an eye defect that causes a Visual Blurring that cannot be corrected by a single spherical glass. Astigmatism requires the correction of the “cylindrical” or glass cylinder, a toric lens, or a toric implant. It is a completely operable defect.
Astigmatism is quite common before and after cataract surgery. Almost one-third of the cataract surgeries performed have at least 1.0 diopter (D) of astigmatism. This causes noticeably blurred vision without eyeglasses or contact lenses.
This condition occurs due to unequal curvatures of the cornea and the crystalline lens, decentration or tilting of the lens, or unequal refractive indices across the crystalline lens, and in some cases, alterations of the geometry of the posterior pole.
We discuss here the case of Cylindrical Defocus which corresponds to irregular astigmatism regular that cannot be corrected by glasses. It only corresponds to all the optical aberrations of high degree that are correctable by surgery.
The cylinder defect can be corrected by Phaco Cataract Surgery in two ways. During Phaco Surgery a toric IOL may be used to correct astigmatism when a cataract is removed: Because this IOL is put securely inside the eye, it can provide a more durable correction of astigmatism than a toric contact lens, which moves on the surface of the eye with each blink.
Toric Lenses with Manual Marking: The toric IOL can be aligned at the intended axis by several methods. Most of these use a 3-step ink-marking procedure and are performed manually. Researches showed an average error of 5% in toric IOL alignment when working manually.
Toric Lenses with VERION Digital Axis Marking Tools: Two new tools have been introduced to the market. These are VERION Measurement Module and VERION Digital Marker.
These tools integrate digital guidance for alignment of toric IOLs, with a manual assessment. They have the potential to reduce the error in horizontal axis marking and the alignment axis marking error. This will lead to a much better result in vision.
Expectations of patients from cataract surgery have increased significantly over the past few decades as surgeons are gradually moving from conventional extracapsular techniques to clear-cornea phacoemulsification. They expect spectacle independence following cataract extraction, in addition to short operating times, topical anesthesia, and a stitchless procedure.
Please remember that medical information provided here is to be used as an educational service only. Without actually visiting an expert eye doctor, you should not treat this as a medical consultation.
You must visit an eye specialist so that she can understand the difficulties you are facing. She will be able to judge better about the appropriateness or risks of a procedure for you. To know more, please visit our website. Or you can email us on firstname.lastname@example.org.
To book an appointment or answer to a quick query, call at +91-8851044355.
You may also check: